Using Report DRC - 2022.2 English

Vivado Design Suite User Guide: Design Analysis and Closure Techniques (UG906)

Document ID
UG906
Release Date
2022-10-19
Version
2022.2 English

Design Rule Checks (DRCs) check the design and report on common issues. Since the 2016.1 release, DRCs are split into two different commands. The methodology DRCs have been moved to the report_methodology command, while all other DRCs are in the report_drc command. Run non-methodology DRCs using the report_drc command. During implementation, the tools also run DRCS. The DRCs become more complete and comprehensive with placement and routing.

Figure 1. Showing Critical Warnings and Error

Review the DRC messages, Critical Warnings, and Warnings early in the flow to prevent issues later.

Critical Warnings in early design stages become Errors later during the implementation flow and prevent bitstream creation. In the above example generated from a post Synthesized Design, the optional Report DRC step reports a Critical Warning for the unconstrained I/Os. The post-route design DRC report also reports these Critical Warnings. You must review the report because at write_bitstream the DRC is elevated to an Error. Review the DRC reports early to identify areas of the design that need modification.