System Migration - 2023.2 English

When you migrate designs to AMD Versal™ adaptive SoC from the AMD UltraScale™ or AMD UltraScale+™ architectures, the AMD tools can only automatically migrate some of the PL primitives and integrated IP blocks. In some cases, there is no equivalent functionality or connectivity in AMD Versal™ devices. Although partial migration might be possible, this approach generally leads to sub-optimal hardware and application performance. Therefore, AMD recommends using the following steps instead:

Rearchitect any high-bandwidth connections between major blocks to use the NoC instead of the PL-based AXI Interconnect or similar IP.
Reduce PL logic by leveraging all new integrated blocks, such as the integrated memory controller, DMA, and AI Engine.
Replace instantiated PL primitives from previous architectures with the equivalent RTL descriptions or XPMs (e.g., memory blocks, DSPs, carry logic, multiplexers, etc.).
Regenerate or recreate all IP blocks.
Resynthesize the complete design instead of migrating netlists created for previous architectures.

Any portion of the design that is automatically migrated must be carefully reviewed to ensure that the application's performance, resource, and power will be met. For designs migrated from AMD Zynq™ UltraScale+™ MPSoCs, AMD recommends recreating the PS functions and connectivity by instantiating the CIPS IP in a new design instead of attempting migration via tools automation.

The following table shows the blocks and functionality for which automatic migration is available.

Table 1. Block and Functionality Migration Support
Block	Automated
Configurable logic block (CLB)	Yes
On-chip memory (OCM) resources (block RAM and UltraRAM)	Most
DSP	Yes
Clocking	Some
I/O	Some
Soft memory controllers	No
AXI Interconnect	No
GT	No
PCIe subsystems	No
Ethernet MAC	No
Processor and peripherals	No
System debug	No
System monitor (SYSMON)	No
Power and error handling	No
Security	No
Boot and configuration	No
PL configuration and JTAG	No

Important: If your existing design contains blocks that are discontinued in Versal adaptive SoC, you must manually migrate these blocks to a corresponding Versal adaptive SoC block. For details, see the appropriate Versal adaptive SoC architecture manual.

For designs migrating from AMD Kintex™ UltraScale™ , Kintex UltraScale+, AMD Virtex™ UltraScale™ , or Virtex UltraScale+ devices, the CIPS IP must be added to enable essential functionality, such as device configuration and hardware debug features, even if the PS features are not used. Other designs migrating from Zynq UltraScale+ MPSoCs are expected to already have a PS block. For more information about the CIPS IP, see the Control, Interface and Processing System LogiCORE IP Product Guide (PG352).