|||0||RW||C2H Stream Marker request
C2H Stream Marker response will be registered at address 0x18, bit .
|||0||RW||Disable completion. For this packet, there will not be any completion.|
When set, the data generator sends immediate data. This is a self-clearing bit. Write 1 to initiate transfer.
|||0||RW||Starts AXI-ST C2H transfer. This is a self-clearing bit. Write 1 to initiate transfer.|
|||0||RW||Streaming loop back. When set, the data packet from H2C streaming port in the Card side is looped back to the C2H streaming ports.|
For Normal C2H stream packet transfer, set address offset 0x08 to 0x2.
For C2H immediate data transfer, set address offset 0x8 to 0x4.
For C2H/H2C stream loopback, set address offset 0x8 to 0x1.