Configuration Extend Interface Ports - 1.0 English

Versal ACAP DMA and Bridge Subsystem for PCI Express Product Guide (PG344)

Document ID
PG344
Release Date
2022-05-20
Version
1.0 English

The Configuration Extend interface allows the core to transfer configuration information with the user application when externally implemented configuration registers are implemented.

Table 1. Configuration Extend Interface Port Descriptions
Port Name I/O Width Description
cfg_ext_read_received O 1 Configuration Extend Read Received
The core asserts this output when it has received a configuration read request from the link. Set when PCI Express Extended Configuration Space Enable is selected in the user defined configuration Capabilities tab in in the Vivado® IDE.
  • All received configuration reads with cfg_ext_register_number in the range of 0xb0-0xbf is considered to be PCIe Legacy Extended Configuration Space.
  • All received configuration reads with cfg_ext_register_number in the range of 0x120-13F is considered to be PCIe Extended Configuration Space.
  • All received configuration reads regardless of their address will be indicated by 1 cycle assertion of cfg_ext_read_received. Valid data is driven on cfg_ext_register_number and cfg_ext_function_number.
  • Only received configuration reads within the two aforementioned ranges need to be responded by the user application outside of the IP.
cfg_ext_write_received O 1 Configuration Extend Write Received
The core asserts this output when it has received a configuration write request from the link. Set when PCI Express Extended Configuration Space Enable is selected in Capabilities tab in the Vivado IDE.
  • Data corresponding to all received configuration writes with cfg_ext_register_number in the range 0xb0-0xbf is presented on cfg_ext_register_number, cfg_ext_function_number, cfg_ext_write_data and cfg_ext_write_byte_enable.
  • All received configuration writes with cfg_ext_register_number in the range 0x120-13F is presented on cfg_ext_register_number, cfg_ext_function_number, cfg_ext_write_data and cfg_ext_write_byte_enable.
cfg_ext_register_number O 10 Configuration Extend Register Number

The 10-bit address of the configuration register being read or written. The data is valid when cfg_ext_read_received or cfg_ext_write_received is High.

cfg_ext_function_number O 8 Configuration Extend Function Number.

The 8-bit function number corresponding to the configuration read or write request. The data is valid when cfg_ext_read_received or cfg_ext_write_received is High.

cfg_ext_write_data O 32 Configuration Extend Write Data

Data being written into a configuration register. This output is valid when cfg_ext_write_received is High.

cfg_ext_write_byte_enable O 4 Configuration Extend Write Byte Enable

Byte enables for a configuration write transaction.

cfg_ext_read_data I 32 Configuration Extend Read Data

You can provide data from an externally implemented configuration register to the core through this bus. The core samples this data on the next positive edge of the clock after it sets cfg_ext_read_received High, if you have set cfg_ext_read_data_valid.

cfg_ext_read_data_valid I 1 Configuration Extend Read Data Valid

The user application asserts this input to the core to supply data from an externally implemented configuration register. The core samples this input data on the next positive edge of the clock after it sets cfg_ext_read_received High. The core expects the assertions of this signal within 262144 ('h4_0000) clock cycles of user clock after receiving the read request on cfg_ext_read_received signal. If no response is received by this time, the core will send auto-response with 'h0 payload, and the user application must discard the response and terminate that particular request immediately