Booting the Evaluation Board - 1.1 English

Vitis AI User Guide (UG1414)

Document ID
UG1414
Release Date
2020-03-23
Version
1.1 English
This example uses a ZCU102 board to illustrate how to boot a Vitis AI evaluation board. Follow the steps below to boot the evaluation board.
  1. Connect the power supply (12V ~ 5A).
  2. Connect the UART debug interface to the host and other peripherals as required.
  3. Turn on the power and wait for the system to boot.
  4. Login to the system.
  5. The system needs to perform some configurations for its first boot. Then reboot the board for these configurations to take effect.