This section includes information about using Xilinx® tools to customize and generate the subsystem in the Vivado® Design Suite.
If you are customizing and generating
the subsystem in the
Vivado IP integrator, see
Vivado Design Suite User Guide: Designing
IP Subsystems using IP Integrator (UG994) for
detailed information. IP integrator might auto-compute certain
configuration values when validating or generating the design. To
check whether the values do change, see the description of the
parameter in this chapter. To view the parameter value, run the
validate_bd_design command in the Tcl
You can customize the IP for use in your design by specifying values for the various parameters associated with the IP subsystem using the following steps:
- Select the IP from the IP catalog.
- Double-click the selected IP or select the Customize IP command from the toolbar or right-click menu.
Figures in this chapter are illustrations of the Vivado IDE. The layout depicted here might vary from the current version.
Select 100G Ethernet IP from the IP catalog, a window displays showing the different available configurations. These are organized in various tabs for better readability and configuration purposes. The details related to these tabs are shown in the following figures.