Device, Package, and Speed Grade Selections - 1.2 English

HDMI 2.1 Receiver Subsystem v1.2 Product Guide (PG351)

Document ID
PG351
Release Date
2023-10-31
Version
1.2 English

For more information on the device constraint/dependency, see the HDMI PHY Controller LogiCORE IP Product Guide (PG333) / HDMI GT Controller LogiCORE IP Product Guide (PG334) .

The following table shows the device and speed grade selections for HDMI 2.1 RX Subsystem.

Table 1. HDMI 2.1 FRL Line Rates Supported Across Devices
MAX FRL Rate 12 Gbps @ 4 Lanes 10 Gbps @ 4 Lanes 8 Gbps @ 4 Lanes 6 Gbps @ 4 Lanes 6 Gbps @ 3 Lanes 3 Gbps @ 3 Lanes TMDS
Device Family Speed Grade GT PLL
AMD Zynq™ AMD UltraScale+™ –1LV, –2LV 1 CPLL, QPLL Not Supported Supported
–1, –1L 4 CPLL Not Supported Supported
QPLL Not Supported Supported
–2, –2L, –3 CPLL, QPLL Supported
AMD Kintex™ UltraScale+™ –1LV, –2LV 1 CPLL, QPLL Not Supported Supported
–1, –1L 4 CPLL Not Supported Supported
QPLL Not Supported Supported
–2, –2L, –3 CPLL, QPLL Supported
AMD Virtex™ UltraScale+™ –2LV 1 CPLL, QPLL Not Supported Supported
–1 4 CPLL Not Supported Supported
QPLL Not Supported Supported
–2, –2L, –3 CPLL, QPLL Supported
Artix UltraScale+ –1LV 1 CPLL, QPLL Not Supported Supported
–1, –1L 4 CPLL Not Supported Supported
QPLL Not Supported Supported
–2 CPLL, QPLL Supported
AMD Versal™ Adaptive SoCs –1LP,–1LHP,–2LP LCPLL,RPLL Not Supported Supported
–1MP,–2HP LCPLL,RPLL Not Supported Supported
–2MP,–3HP LCPLL,RPLL Supported
  1. 5Kp100, 5Kp120 resolutions are supported only in 8ppc mode for –1LV,–2LV,–1LP,–1LHP and –2LP devices due to the s_axis_video_clock fmax restriction.
  2. Maximum FRL rate supported by IP will be selected automatically based on device family and speed grade. You must provide the frl_clock frequency mentioned in the HDMI 2.1 Clocks table. However, you can lower the FRL rate by changing the MAX FRL rate in HF-VSDB block of EDID.
  3. xcau10p and xcau15p devices are not supported due to fabric size.
  4. For GTHE4, –1,–1M, –1L, -1LV, –2LV, and –2LVI parts, and for GTYE4 –1,–1M,–1L, and –1LV parts, the maximum supported FRL line rate is 8.0 Gbps due to the limitation on CPLL and USRCLKs.