Basic Tab - 2.0 English

NVMe Target Controller LogiCORE IP Product Guide (PG329)

Document ID
Release Date
2.0 English

The Basic tab is shown in the following figure:

Figure 1. Basic Tab
Configure for Aggregator System
Allows you to configure the IP to be used in the aggregator solution.
Number of functions/NVMe endpoint controllers.
Command Pool Depth
Number of commands to pool for the hardware application.
Maximum DMA Size
4 KB tuned for QDMA requirement
Local DDR Address Width
NVMe TC subsystem local address bus width
DMA Data Width
This should match with the QDMA lane width and AXI data width.