The Board tab page provides board automation related parameters. The subsystem board configuration screen is shown in This Figure .
Board Interface: Select the board parameters.
• Custom: Allows user to configure custom values (no board automation support).
•
fmc_hpc0_connector_EV_DSITx
: Applicable only for ZCU102 board with FMC_HPC0 connector selected as LI-IMX274MIPI-FMC V1.0 during board selection.
This selection automatically configures the MIPI DSI TX Subsystem to support AUO display which can be connected to EV FMC card. For more information, see the LI-IMX274MIPI-FMC product page
[Ref 20]
.
Note: Board automation is valid for ZCU102 board with FMC_HPC0 slot only.