Allows you to configure protocol specific options such as the number of lanes to be used.
Bits |
Name |
Reset Value |
Access |
Description |
---|---|---|---|---|
31:14 |
Reserved |
NA |
NA |
Reserved |
13 |
EoTp |
0x1 |
R/W |
0: Disable EoTp Generation. 1: Enable EoTp Generation. |
12:7 |
Pixel Format |
0x3E |
R |
Data type for pixel format. Data type of pixel format selected through the GUI. 0x0E – Packed RGB565 0x1E- packed RGB666 0x2E – Loosely packed RGB666 0x3E- Packed RGB888 0x0B- Compressed Pixel Stream Note: The default data type selected in the GUI is RGB888. Hence, the default value of the register is mentioned as 0x3E. It varies with the datatype selected in the GUI. |
6 |
BLLP Mode |
0x0 |
R/W |
BLLP selection 0: Send blanking packets during BLLP periods 1: Use LP mode for BLLP periods |
5 |
Blanking packet type |
0x0 |
R/W |
Blanking packet type for BLLP region 0: Blanking packet(0x19) 1: Null packet(0x09) |
4:3 |
Video Mode |
0x0 |
R/W |
Video mode transmission sequence 0x0- Non-burst mode with sync pulses 0x1 – Non-burst mode with Sync Events 0x2- Burst mode |
2 |
Reserved |
NA |
|
Reserved for future lane extension support. |
1:0 |
Active Lanes |
Configured Lanes during core generation |
R |
Configured lanes in the core 0x0 - 1 Lane 0x1 - 2 Lanes 0x2 - 3 Lanes 0x3 - 4 Lanes |