IP Integrator - 2.3 English

Semi-Ternary CAM Search LogiCORE IP Product Guide (PG319)

Document ID
PG319
Release Date
2022-05-25
Version
2.3 English

If you are customizing and generating the core in the Vivado IP integrator, see the Vivado Design Suite User Guide: Designing IP Subsystems using IP Integrator (UG994) for detailed information. IP integrator will auto-compute certain configuration values when validating or generating the design. To check whether the values change, see the description of the parameter in this chapter. To view the parameter value you can run the validate_bd_design command in the Tcl Console.

To instantiate the CAM IP in Vivado Design Suite using IP integrator, follow these steps:

  1. Open a project in the Vivado tool.
  2. Click Create Block Design in the panel on the left.
  3. Right-click in the Diagram window and select Add IP.

  4. Search for "cam" in the search box of the window that appears and select CAM IP.

  5. The CAM IP can be configured by double-clicking the instantiated IP.