Add the IP Repository - 2020.2 English

Vivado Design Suite Tutorial: Creating and Packaging Custom IP (UG1119)

Document ID
UG1119
Release Date
2021-02-04
Version
2020.2 English
Before you package the parent IP, you must set the repository location in the project settings to include the common_v1_0 IP that was just created in the IP catalog.
  1. Select Flow Navigator > Project Manager > Settings > IP.
  2. Expand IP and select the Repository. In the view, the repository in which the previously packaged IP should automatically show up, if not click the Add Repository button.
  3. In the IP Repositories dialog box, select the path <Extract_Dir>/lab_4/trunk and press Select to add the repository.

    The Add Repository dialog box opens to display that the trunk repository was added to the project and one IP was found, as shown in the following figure.



  4. Click OK.

    The Repository Manager is now populated with the selected IP repository, in addition to the common_v1_0 repository.

  5. To remove the common_v1_0 repository, select it and then select the Remove button .
  6. Click OK to close the IP Setting dialog box.