Open Source Bootgen for On-target Use for Zynq Devices and Zynq UltraScale+ MPSoC - 2020.2 English

PetaLinux Tools Documentation Reference Guide (UG1144)

Document ID
UG1144
Release Date
2020-11-24
Version
2020.2 English

If you want to build an open source bootgen as part of the root file system, follow these steps.

  1. Go to the PetaLinux project: cd <plnx-proj-root>
  2. Run petalinux-config -c rootfs and select Filesystem Packages > Bootgen
  3. Run petalinux-build.

    Once the target is up, you can find the bootgen binary in /usr/bin.