- Double-click ColorSpace_Conversion_fixed_start.slx in the Current Folder to open the design.
- Open the HLS library in the Simulink Library Browser.
- Navigate to the Signal Attributes sub-library, select the Data Type
Conversion block, and drag it into the empty slots in the
designs, before and after the RGB to YCbCr subsystem.
- Open the Data Type Conversion blocks at the inputs of the RGB to YCbCr
Subsystem, and do the following:
- Change the Output data type parameter to fixed.
- Set the Signedness to Unsigned.
- Set the Word length to 8.
- Set Fractional length to 7.
- Click Apply, and close the dialog box.
- Add the Data Type Conversion blocks at the output of the RGB to YCbCr Subsystem and set the Output data type parameter to single. This will enable connecting the output signals to the Video Viewer blocks for visualization.
- Double-click the RGB to YCbCr
subsystem to descend the hierarchy and open the model. Within the RGB to YCbCr
subsystem, there are subsystems to calculate Y, Cb, and Cr components using Gain
and Constant blocks.
You can control the fixed point types for the gain parameter in the Gain blocks and the value in the Constant blocks. You can do this by opening up the Calculate_Y, Calculate_Cb, and Calculate_Cr blocks and setting the data types as follows.
For Gain blocks, set the Gain data type to fixed. For Constant blocks, on the Data Types tab set the Output data type to fixed. The following options appear:
Tip: You can use the command to open the Property Inspector window. When you select the different Gain or Constant blocks, you can see and modify the properties on the selected block.
- Signedness to Signed
- Gain data type to fixed
- Word length to 8
- Fractional length to 7
Ensure you do this for all the Constant and Gain blocks in the design. Update the model (Ctrl+D) and observe the fixed point data types being propagated along with automatic bit growth in gain blocks and adder trees in the design as shown in the following figure:
- Word Length
- Fractional Length
For example, x_sfix16_En8 represents a signed fixed point number with Word Length=16 and Fractional Length=8.
You can view a completed version of the design here: ModelComposer_Tutorial\Lab1\Section2\solution\Colorspace_Conversion_fixed.slx