Step 1: Creating a Design in an FPGA - 2020.2 English

Vivado Design Suite Tutorial: Model-Based DSP Design using Add-on for MATLAB and Simulink (UG1498)

Document ID
UG1498
Release Date
2021-01-22
Version
2020.2 English
In this step, you learn the basic operation of System Generator and how to synthesize a Simulink design into an FPGA.
  1. Invoke System Generator.
    • On Windows systems, select Start > All Programs > Xilinx Design Tools > Vivado 2020.x > System Generator > System Generator 2020.x.
    • On Linux systems, type sysgen at the command prompt.
  2. Navigate to the Lab1 folder: cd C:\SysGen_Tutorial\Lab1.

    You can view the directory contents in the MATLABĀ® Current Folder browser, or type ls at the command line prompt.

  3. Open the Lab1_1 design as follows:
    1. At the MATLAB command prompt, type open Lab1_1.slx OR
    2. Double-click Lab1_1.slx in the Current Folder browser.

    The Lab1_1 design opens, showing two sine wave sources being added together and passed separately through two low-pass filters. This design highlights that a low-pass filter can be implemented using the Simulink FDATool or Lowpass Filter blocks.



  4. From your Simulink project worksheet, select Simulation > Run or click the Run simulation button.

    When simulation completes you can see the spectrum for the initial summed waveforms, showing a 1 MHz and 9 MHz component, and the results of both filters showing the attenuation of the 9 MHz signals.



    You will now create a version of this same filter using System Generator blocks for implementation in an FPGA.

  5. Click the Library Browser button in the Simulink toolbar to open the Simulink Library Browser.

    When using System Generator, the Simulink library includes specific blocks for implementing designs in an FPGA. You can find a complete description of the blocks provided by System Generator in the Vivado Design Suite Reference Guide: Model-Based DSP Design Using System Generator (UG958).

  6. Expand the Xilinx Blockset menu, select DSP, then select Digital FIR Filter.
  7. Right-click the Digital FIR Filter block and select Add block to model Lab1_1.

    You can define the filter coefficients for the Digital FIR Filter block by accessing the block attributesā€“double-click the Digital FIR Filter block to view theseā€“or, as in this case, they can be defined using the FDATool.

  8. In the same DSP blockset as the previous step, select FDATool and add it to the Lab1_1 design.

    An FPGA design requires three important aspects to be defined:

    • The input ports
    • The output ports
    • The FPGA technology

    The next three steps show how each of these attributes is added to your Simulink design.

    Important: If you fail to correctly add these components to your design, it cannot be implemented in an FPGA. Subsequent labs will review in detail how these blocks are configured; however, they must be present in all System Generator designs.
  9. In the Basic Elements menu, select Gateway In, and add it to the design.

  10. Similarly, from the same menu, add a Gateway Out block to the design.
  11. Similarly, from the same menu, add the System Generator token used to define the FPGA technology.
  12. Finally, make a copy of one of the existing Spectrum Analyzer blocks, and rename the instance to Spectrum Analyzer SysGen by clicking the instance name label and editing the text.
  13. Connect the blocks as shown in the following figure. Use the left-mouse key to make connections between ports and nets.

The next part of the design process is to configure the System Generator blocks.