Set Default Rates - 2020.2 English

Xilinx Power Estimator User Guide (UG440)

Document ID
UG440
Release Date
2020-12-04
Version
2020.2 English

This button opens up a dialog box which lets you change the default frequency, toggle rates or enable rates for the entire design or for specific sheets as shown in the following figure.

Note: In the dialog box, default values set by XPE are shown in square brackets [].
Figure 1. Set Default Activity Rates Dialog Box
Toggle Rates
Each field changes activity of the related sheet only. Acceptable range: 0 to 100%. To learn more about toggle rates, refer to Toggle Rates.
Enable Rates
Each field changes activity of the related sheet only. Acceptable range: 0 to 100%.
All Clock Nets
The clock frequency entered here applies to CLOCK, LOGIC, IO, BRAM and DSP sheets.
Output Load
The equivalent capacitance seen by the output driver for the routing and components connected to this board trace. This setting does not affect power calculations for inputs.