add_wave_group - 2020.2 English

Vivado Design Suite Tcl Command Reference Guide (UG835)

Document ID
UG835
Release Date
2020-11-18
Version
2020.2 English

Add a new group

Syntax

add_wave_group [‑into <args>] [‑at_wave <args>] [‑after_wave <args>]
    [‑before_wave <args>] [‑quiet] [‑verbose] [<name>]

Returns

The new group

Usage

Name Description
[-into] the wave configuration or group into which the new group will be inserted.
[-at_wave] inserts the new group into the specified wave object, or after the specified wave object if not a group
[-after_wave] inserts the new group after the specified wave object
[-before_wave] inserts the new group before the specified wave object
[-quiet] Ignore command errors
[-verbose] Suspend message limits during command execution
[<name>] the displayed name of the new group to the specified string Default: new_group

Categories

Waveform

Description

Creates a wave group into a specified or current waveform configuration. New wave objects and wave_dividers can be added into the wave group to build up the waveform display.

The wave group can be inserted at a specified location. If no location is specified the group is inserted at the end of the specified waveform configuration.

The command returns the name of the newly created wave group object.
Note: This command can only be used when running a simulation.

Arguments

-into <wcfgGroupVbusObj> - (Optional) Specifies the wave configuration, group, or virtual bus into which the new wave group object(s) are inserted. If <wcfgGroupVbusObj> is a string instead of an object, it is treated as the name of a group in the current WCFG. If no such group is found, the tool searches the names of the virtual buses of the current WCFG. If still not found, the tool searches the names of all WCFG objects. If no -into object is specified, the current wave configuration is assumed.

-at_wave <waveObj> - (Optional) Adds a wave group at a specified wave object. If <waveObj> is a string, it is treated as the display name of a wave object.

-after_wave <waveObj> - (Optional) Adds a wave group after a specified wave object. If <waveObj> is a string, it is treated as the display name of a wave object.

-before_wave <waveObj> - (Optional) Adds a wave group before a specified wave object. If <waveObj> is a string, it is treated as the display name of a wave object.

-quiet - (Optional) Execute the command quietly, returning no messages from the command. The command also returns TCL_OK regardless of any errors encountered during execution.
Note: Any errors encountered on the command-line, while launching the command, will be returned. Only errors occurring inside the command will be trapped.
-verbose - (Optional) Temporarily override any message limits and return all messages from this command.
Note: Message limits can be defined with the set_msg_config command.

<name> - (Optional) Creates a wave group with the specified display name. The default name is new_group.

Examples

Add a clk to the existing waveform configuration:

add_wave_group clk  
 group10