remove_hw_sio_sweep - 2020.2 English

Vivado Design Suite Tcl Command Reference Guide (UG835)

Document ID
UG835
Release Date
2020-11-18
Version
2020.2 English

Remove an existing hardware SIO sweep.

Syntax

remove_hw_sio_sweep [‑quiet] [‑verbose] <hw_sio_sweeps>

Usage

Name Description
[-quiet] Ignore command errors
[-verbose] Suspend message limits during command execution
<hw_sio_sweeps> hardware SIO sweeps

Categories

Hardware

Description

Remove the specified serial I/O analyzer sweep scan object.

This command returns nothing if successful, or returns an error if the command fails.

Arguments

-quiet - (Optional) Execute the command quietly, returning no messages from the command. The command also returns TCL_OK regardless of any errors encountered during execution.
Note: Any errors encountered on the command-line, while launching the command, will be returned. Only errors occurring inside the command will be trapped.
-verbose - (Optional) Temporarily override any message limits and return all messages from this command.
Note: Message limits can be defined with the set_msg_config command.

<hw_sio_sweeps> - (Required) Specify one or more hw_sio_sweep objects to remove. The hw_sio_sweep must be specified as an object as returned by the create_hw_sio_sweep or get_hw_sio_sweeps commands.

Example

The following example removes the specified sweep scan object:
remove_hw_sio_sweep [get_hw_sio_sweeps {SWEEP_3}]