replace_bd_cell - 2020.2 English

Vivado Design Suite Tcl Command Reference Guide (UG835)

Document ID
UG835
Release Date
2020-11-18
Version
2020.2 English

Replace cell1 with cell2 by disconnecting connections to cell1 and connecting those connections to cell2.

Syntax

replace_bd_cell [‑preserve_name] [‑preserve_configuration] [‑quiet]
    [‑verbose] [<cell1>] [<cell2>...]

Returns

TCL_OK, TCL_ERROR if failed.

Usage

Name Description
[-preserve_name] cell2 will rename as cell1's name, cell1 rename as cell1name_old
[-preserve_configuration] preserve configuration of cell1 on cell2
[-quiet] Ignore command errors
[-verbose] Suspend message limits during command execution
[<cell1>] Cell with connections that are to be disconnected.
[<cell2>] Cell to be connected to connections that were disconnected from cell1.

Categories

IPIntegrator

Description

Move the connections currently assigned to one IP integrator cell to another IP integrator cell in the current design. This is intended to help you quickly replace one cell with another by moving connections from the source cell to the target cell.

The current, or existing cell, will be relocated from its current position in the block design, and the new replacing cell will be placed at that location. Connections to the pins and interface pins on the cell are preserved where possible, and result in a Critical Warning when connections must be removed.
Important: This command is not supported by the UNDO command.

This command returns TCL_OK if it is successful, or returns TCL_ERROR if it fails.

Arguments

-preserve_name - (Optional) Apply the name of the current cell to the new cell that is replacing it. The existing cell will be renamed as <instance>_old.

-preserve_configuration - (Optional) Apply the configuration settings of the current cell to the new cell that is replacing it.
Note: Any configuration options on the original cell that cannot be applied to the new cell will be reported as a warning, and then skipped.
-quiet - (Optional) Execute the command quietly, returning no messages from the command. The command also returns TCL_OK regardless of any errors encountered during execution.
Note: Any errors encountered on the command-line, while launching the command, will be returned. Only errors occurring inside the command will be trapped.
-verbose - (Optional) Temporarily override any message limits and return all messages from this command.
Note: Message limits can be defined with the set_msg_config command.
<cell1> - (Required) The IP integrator cell to remove connections from and to replace with a new cell. The cell can be specified either by name, or as a bd_cell object returned by the get_bd_cells command.
Note: The cell is not removed from the IP integrator subsystem design, but is relocated to make room for the new cell.

<cell2> - The IP integrator cell that replaces the existing cell (<cell1>) and that existing connections are applied to. The cell can be specified either by name, or as a bd_cell object returned by the get_bd_cells command.

Example

The following example moves the connections from the specified cell, lmb_v10_1, to pins and interface pins of the same name on another cell, lmb_bram_cntlr_1:
replace_bd_cell [get_bd_cells /lmb_v10_1] [get_bd_cells \  
   /lmb_bram_if_cntlr_1]  
CRITICAL WARNING: [BD 41-1164] The interface pin 'LMB_Sl_0' with   
bus definition 'xilinx.com:interface:lmb:1.0' is not found on the  
cell '/lmb_bram_if_cntlr_1'. Its connection to the interface   
net 'Conn' has been removed.   
CRITICAL WARNING: [BD 41-1166] The pin 'SYS_Rst' is not found  
on the cell '/lmb_bram_if_cntlr_1'. Its connection to the net   
'sys_rst_1' has been removed.  
0
Note: Critical Warnings are returned when pin mismatches necessitate the removal of existing connections.