report_pipeline_analysis - 2020.2 English

Vivado Design Suite Tcl Command Reference Guide (UG835)

Document ID
UG835
Release Date
2020-11-18
Version
2020.2 English

Perform pipeline register insertion analysis and display report.

Syntax

report_pipeline_analysis [‑cells <args>] [‑verbose] [‑clocks <args>]
    [‑file <arg>] [‑include_paths_to_pipeline] [‑append]
    [‑max_added_latency <arg>] [‑report_loops] [‑return_string] [‑quiet]

Usage

Name Description
[-cells] Analyze each of the specified hierarchical cells separately and ignore feedback loops external to the cells.
[-verbose] Suspend message limits during command execution
[-clocks] Filter report output to show only the specified clocks
[-file] Filename to output results to. (send output to console if -file is not used)
[-include_paths_to_pipeline] Report paths to cut. (only available if -file is used)
[-append] Append to existing file
[-max_added_latency] Maximum extra latency that can be inserted into the system (0 = unlimited). Default: 100
[-report_loops] Report loop information as well
[-return_string] return report as string
[-quiet] Ignore command errors

Categories

Tools

Description

This command performs an analysis of a synthesized design, hypothetically inserting pipeline stages in the design and reports the potential frequency (Fmax) increase of each clock domain. The analysis includes a search for loops in the design, which may not be improved by pipelining, and determines if such loops are critical paths in the design.

Returns a table showing the pipeline stages and the Fmax improvement. The report begins with the original design and adds stages of latency (1, 2, ... ) until there is no further improvement in Fmax. This reports a theoretical upper limit to the frequency performance of the design.

The analysis is typically run on the un-placed synthesized netlist where the logical netlist structure determines the performance. The report can be run on the top-level design, or on out-of-context (OOC) sub-modules. This report confirms whether the design frequency can be increased, as well as how many pipeline registers must be added to the design to achieve the Fmax improvement.

Note: By default the report is written to the Tcl console or STD output. However, the results can also be written to a file.

Arguments

-cells <args> - (Optional) Perform pipeline analysis for the specified hierarchical cells. Specifying multiple cells causes the pipeline analysis report to be generated for each cell. The cells of interest can be specified by name, or returned as an object using the get_cells command.

-verbose <arg> - (Optional) Specify the level of detail in the returned report. The argument can be specified with an integer value greater than 0.

-clocks <args> - (Optional) Specifies the clock domains to analyze when generating the report. If not specified, the timing paths for all clocks are analyzed. This limits results to paths groups involving the specified clock domains.

-file <arg> - (Optional) Write the report into the specified file. The specified file will be overwritten if one already exists, unless -append is also specified.
Note: If the path is not specified as part of the file name, the file will be written into the current working directory, or the directory from which the tool was launched.
-include_paths_to_pipeline - (Optional) Report recommendations for paths to pipeline in the current design.
Tip: The -file option must also be specified when this option is used.
-append - (Optional) Append the output of the command to the specified file rather than overwriting it.
Note: The -append option can only be used with the -file option.

-max_added_latency <arg> - (Optional) Specify the additional levels of delay to add through pipeline insertion. The latency is specified as an integer from 1 to 100, representing the maximum number of pipeline stages to consider during the pipeline analysis. The default setting is 0, which directs the tool to insert pipeline delays until there is no further improvement in design performance. The tool analyzes the number of stages up to the specified limit, or until there is not further gain in Fmax.

-report_loops - (Optional) Report the slowest path within a sequential feedback loop. These are paths starting from and ending at the same sequential cell, and may have zero, one, or more sequential cells in the feedback path. Sequential loops cannot be pipelined.

-return_string - (Optional) Directs the output to a Tcl string rather than to the standard output. The Tcl string can be captured by a variable definition and parsed or otherwise processed.
Note: This argument cannot be used with the -file option.
-quiet - (Optional) Execute the command quietly, returning no messages from the command. The command also returns TCL_OK regardless of any errors encountered during execution.
Note: Any errors encountered on the command-line, while launching the command, will be returned. Only errors occurring inside the command will be trapped.

Examples

The following example returns the name, period, waveform, and sources of the clocks in the current design:
report_pipeline_analysis -file C:/Data/FPGA_Design/pipeline_report.txt