Run Parameter Propagation for specified design or for a specific cell.
Syntax
validate_bd_design [‑force] [‑design <arg>] [‑include_pfm] [‑quiet]
[‑verbose]Returns
TCL_OK, TCL_ERROR if failed.
Usage
| Name | Description |
|---|---|
[-force]
|
Force re-run validation on the design |
[-design]
|
Design name. If not specified, run parameter propagation on current design |
[-include_pfm]
|
including validate pfm attributes on the design |
[-quiet]
|
Ignore command errors |
[-verbose]
|
Suspend message limits during command execution |
Categories
Description
Validate an IP integrator subsystem design, or IP cell or hierarchical module.
Arguments
-force - (Optional) Force validation on the block design.
-design <arg> - (Optional) The IP integrator subsystem design to validate. If not specified, the current IP integrator subsystem design is validated.
-include_pfm - (Optional) Validate the required DSA and PFM attributes on a block design created as the hardware portion of a Vitis platform. Errors will be returned if the platform properties are not properly defined.
-quiet - (Optional) Execute the command quietly, returning no messages from the command. The command also returns TCL_OK regardless of any errors encountered during execution.
Note: Any errors encountered on the command-line, while launching the command, will be returned. Only errors occurring inside the command will be trapped.
-verbose - (Optional) Temporarily override any message limits and return all messages from this command.
Note: Message limits can be defined with the
set_msg_config command.Examples
The following example validates the current IP integrator subsystem design, forcing re-validation if needed:
validate_bd_design -force