- In the Waveform window, hold Ctrl and click to select the
sineSel[1:0]signals listed in the
DUTsignals group, under the
- Hold Ctrl, and click to select the
sine[19:0]signals listed in the
Outputsgroup, under the
- Right-click in the Waveform window to
open the popup menu, and select the command.
The displayed name changes to include the hierarchical path of the signal. You can now see that the
sine[19:0]signals under the DUT Signals group refers to different objects in the design hierarchy than the
sine[19:0]signals listed under the
Outputsgroup. See the figure below.
By default, the Vivado® simulator adds signals to the waveform configuration using a short name with the hierarchy reference removed. For some signals, it is important to know to which module they belong.