This step shows how you can get the display of static probability and toggle rate for a signal in property window.
- Note the total power (Total On-Chip Power) in the Power Report Summary view.
- Click the Set/Reset item in the Power Report.
- Click on the dut/dut_reset signal.
- Note that there is a Power tab in the Net Properties window that displays Net Properties for
dut/dut_resetsignal. Click on Load Power Properties to get the power information the first time.
- Note the Toggle
rate is 0% and the Static
probability is 0 for the
dut/dut_resetsignal, which indicates that reset is always deasserted in the design.