You can customize the VCU Sync IP core in the Vivado IDE. The following configuration options are available:
- Configuration page
-
- Number of Capture channel
In the Capture channel, there is an option to select from ONE to FOUR. (Default: FOUR)
- Number of Consumers
In the consumer, there is an option to select from ONE to FOUR. (Default: TWO)
- Number of Capture channel
- Implementation optimization page
-
- Memory Size
This option is to enable the user to select the external memory size of the board. The range of the memory size are fixed. Values are 2GB, 4GB, 16GB and 16K GB. (Default: 16kGB)
- Enable Multi Clock
This option is to enable when the design uses more than one clocks for capture, consumer and control side. (Default: Disable)
- Producer address alignment
This option is to enable the customer to configure the producer write size. This will aid the resource optimization. The options are fixed. Options are Unaligned, 32-byte aligned, 64-byte aligned, 128-byte aligned, 256-byte aligned, and 512-byte aligned (Default: Unaligned)
- Memory Size
The following figure shows the GUI configuration details: