Step 6: Review and Package the IP - 2021.1 English

Vivado Design Suite Tutorial: Creating and Packaging Custom IP (UG1119)

Document ID
UG1119
Release Date
2021-07-19
Version
2021.1 English
The custom IP was initially packaged at the end of the Create and Package New IP wizard, but because changes were made in the Package IP window, the custom IP must be re-packaged for the changes to take effect.
  1. On the left side of the Package IP window, select Review and Package.

    The Review and Package page provides a summary of the IP being packaged, as shown in the following figure:



    With default settings of the current project, Vivado does not generate an archive for this IP after packaging. This is reflected in the After Packaging section of the Review and Package page of the Package IP window.

  2. Make a note of the location of the IP repository in the After Packaging section. This is necessary to validate the custom IP in the next step.
  3. In the Package IP window, click Package IP to package the current project and add it to the IP catalog.
  4. After the packaging process completes, close the Vivado project from the File menu.