XPM_CDC_ASYNC_RST - 2021.1 English

Versal Architecture Prime Series Libraries Guide (UG1344)

Document ID
UG1344
Release Date
2021-06-16
Version
2021.1 English

Parameterized Macro: Asynchronous Reset Synchronizer

  • MACRO_GROUP: XPM
  • MACRO_SUBGROUP: XPM_CDC

Introduction

This macro synchronizes an asynchronous reset signal to the destination clock domain. The resulting reset output will be guaranteed to assert asynchronously in relation to the input but the deassertion of the output will always be synchronous to the destination clock domain.

You can define the polarity of the reset signal and the minimal output pulse width of the macro when asserted. The latter is controlled by defining the number of register stages used in the synchronizers.

Note: The minimum input pulse assertion is dependent on the setup and hold requirement of the reset or set pin of the registers. See the respective DC and AC switching characteristics data sheets for the targeted architecture.

Port Descriptions

Port Direction Width Domain Sense Handling if Unused Function
dest_arst Output 1 dest_clk NA Active

src_arst asynchronous reset signal synchronized to destination clock domain. This output is registered.

NOTE: Signal asserts asynchronously but deasserts synchronously to dest_clk. Width of the reset signal is at least (DEST_SYNC_FF*dest_clk) period.
dest_clk Input 1 NA EDGE_RISING Active Destination clock.
src_arst Input 1 NA NA Active Source asynchronous reset signal.

Design Entry Method

Instantiation Yes
Inference No
IP and IP Integrator Catalog No

Available Attributes

Attribute Type Allowed Values Default Description
DEST_SYNC_FF DECIMAL 2 to 10 4 Number of register stages used to synchronize signal in the destination clock domain. This parameter also determines the minimum width of the asserted reset signal.
INIT_SYNC_FF DECIMAL 0, 1 0

0- Disable behavioral simulation initialization value(s) on synchronization registers.

1- Enable behavioral simulation initialization value(s) on synchronization registers.

RST_ACTIVE_HIGH DECIMAL 0, 1 0

Defines the polarity of the asynchronous reset signal.

  • 0- Active low asynchronous reset signal
  • 1- Active high asynchronous reset signal

VHDL Instantiation Template

Unless they already exist, copy the following two statements and paste them before the entity declaration.
Library xpm;
use xpm.vcomponents.all;

-- xpm_cdc_async_rst: Asynchronous Reset Synchronizer
-- Xilinx Parameterized Macro, version 2021.1

xpm_cdc_async_rst_inst : xpm_cdc_async_rst
generic map (
   DEST_SYNC_FF => 4,    -- DECIMAL; range: 2-10
   INIT_SYNC_FF => 0,    -- DECIMAL; 0=disable simulation init values, 1=enable simulation init values
   RST_ACTIVE_HIGH => 0  -- DECIMAL; 0=active low reset, 1=active high reset
)
port map (
   dest_arst => dest_arst, -- 1-bit output: src_arst asynchronous reset signal synchronized to destination
                           -- clock domain. This output is registered. NOTE: Signal asserts asynchronously
                           -- but deasserts synchronously to dest_clk. Width of the reset signal is at least
                           -- (DEST_SYNC_FF*dest_clk) period.

   dest_clk => dest_clk,   -- 1-bit input: Destination clock.
   src_arst => src_arst    -- 1-bit input: Source asynchronous reset signal.
);

-- End of xpm_cdc_async_rst_inst instantiation

Verilog Instantiation Template


// xpm_cdc_async_rst: Asynchronous Reset Synchronizer
// Xilinx Parameterized Macro, version 2021.1

xpm_cdc_async_rst #(
   .DEST_SYNC_FF(4),    // DECIMAL; range: 2-10
   .INIT_SYNC_FF(0),    // DECIMAL; 0=disable simulation init values, 1=enable simulation init values
   .RST_ACTIVE_HIGH(0)  // DECIMAL; 0=active low reset, 1=active high reset
)
xpm_cdc_async_rst_inst (
   .dest_arst(dest_arst), // 1-bit output: src_arst asynchronous reset signal synchronized to destination
                          // clock domain. This output is registered. NOTE: Signal asserts asynchronously
                          // but deasserts synchronously to dest_clk. Width of the reset signal is at least
                          // (DEST_SYNC_FF*dest_clk) period.

   .dest_clk(dest_clk),   // 1-bit input: Destination clock.
   .src_arst(src_arst)    // 1-bit input: Source asynchronous reset signal.
);

// End of xpm_cdc_async_rst_inst instantiation

Related Information