Using the USER_CLOCK_ROOT Property on a Clock Net - 2021.1 English

Versal ACAP Hardware, IP, and Platform Development Methodology Guide (UG1387)

Document ID
UG1387
Release Date
2021-07-26
Version
2021.1 English
You can use the USER_CLOCK_ROOT property to force the clock root location of a clock driven by a clock buffer. Specifying the USER_CLOCK_ROOT property influences the design placement, because it impacts both insertion delay and skew by modifying the clock routing. The USER_CLOCK_ROOT value corresponds to a clock region, and you must set the property on the net segment directly driven by the high fanout clock buffer. Following is an example:
set_property USER_CLOCK_ROOT X3Y2 [get_nets -of [get_pins clkgen/BUFG_clkout2_inst/O]]
Figure 1. USER_CLOCK_ROOT Applied on the Net Segment Driven by the Clock Buffer

After placement, you can use the CLOCK_ROOT property to query the actual clock root as shown in the following example. The CLOCK_ROOT reports the assigned root whether it was user assigned or automatically assigned by the Vivado tools.

get_property CLOCK_ROOT [get_nets -of [get_pins clkgen/BUFG_clkout2_inst/O]]
=> X3Y2

Another way to review the clock root assignments of your implemented design is to use the report_clock_utilization Tcl command. For example:

report_clock_utilization [-clock_roots_only]

The following figure shows this report.

Figure 2. report_clock_utilization Clock Root Assignments