Provide a unique name for your configuration. Next, in the Target Setup view, set up the following details:
- Debug Type
- Connection: Local or Remote
Select Local for running the program on a target that is connected to local host.
Create a remote connection by clicking New, and select the same for running the program on a target connected to the remote host.
- FPGA Device
- This is automatically selected for you.
- PS Device
- This is automatically selected for you.
- Hardware Platform
- Select the hardware platform for your design.
- Bitstream file
- Search or browse to your Bitstream file.
- FSBL File or Initialization File
- Selects either the FSBL file or Initialization file based on whether the checkbox is selected. By default, the Use FSBL Flow for Initialization check-box is checked.
- Reset Entire System
- Perform a system reset if there is only one processor in the system.
- Initialize Using FSBL file
- Initialize PS using FSBL file.
- Reset APU
- Reset all the APU processor cores.
- Reset RPU
- Reset all the RPU processor cores.
- Enable RPU Split Mode
- Put RPU cores in split mode so that they can be used independent of each other.
- Program FPGA
- To program the bit file.
- Skip Revision Check
- Enabling this option will skip the device revision while programming bitstream.
