In this step you create a Vivado project which you will use to create
your hardware design.
- Double-click the System Generator token to open the Properties Editor.
- In the Properties Editor, make sure IP catalog is selected for the Compilation type.
- Click Generate to generate a design in IP catalog format.
- Click OK to dismiss the Compilation status dialog box.
- Click OK to dismiss the
System Generator token.
The design has been written in IP catalog format to the directory ./IPI_Project. You will now import this IP into the Vivado IP catalog and use the IP in an existing example project.
- Open the Vivado IDE using .
- Click Create Project.
- Click Next.
- Enter \HDL_Library\Lab5\IPI_Project for
the Project Location.Tip: You will have to manually type
/IPI_Project
in the Project location box to create the IPI_Project directory.
- Click Next.
- Select both RTL Project and Do not specify sources at this time and click Next.
- Select Boards and
ZYNQ-7 ZC702 Evaluation Board as
shown in the next figure.
- Click Next.
- Click Finish.
You have now created a Vivado project based on the ZC702 evaluation board.