Report Power supports the power estimation of
Soft-Decision FEC core available in
Zynq®
UltraScale+™ RFSoCs. When the design
containing the SD-FEC IP is implemented, Report Power displays the power estimation as
shown in the following figure.
Figure 1. Report Power with SD-FEC Power Estimation
Following properties can be modified before running the Report Power for the SD-FEC object after implementation:
- LD_PERCENT_LOAD: Percentage utilization for LDPC Decoder core
- LE_PERCENT_LOAD: Percentage utilization for LDPC Encoder core
- TD_PERCENT_LOAD: Percentage utilization for Turbo Decoder core
These three properties can also be provided during SD-FEC IP
customization and using set_property commands on an
implemented design. Also, the generated .xpe
file by Report Power command can be imported to XPE spreadsheet for further what-if
analysis.