Editing Reconfigurable Modules - 2021.1 English

Vivado Design Suite User Guide: Dynamic Function eXchange (UG909)

Document ID
UG909
Release Date
2022-02-25
Version
2021.1 English
  1. After selecting Next to progress past the introduction, the first content page allows you to define new RMs for any Partition Definitions (PD) defined. The first RM for each PD has already been included here, if the RTL/netlist source was present when the PD was created. Click on the blue + to create a new RM and give it a unique name. Be sure to select the correct PD if more than one exists in the design. If netlist sources are selected, select the Sources are already synthesized check box and declare the Top Module within the netlist.
    Figure 1. Creating a New Reconfigurable Module
  2. Repeat this process for all existing RMs for every Partition Definition. If a gray box module is desired, no action is required. Note that RMs may be edited by clicking on the pencil icon or removed by clicking the red - icon. When all RM are accounted for click Next.
    Figure 2. Set of Reconfigurable Modules Defined