Trace capability is used for debugging simulation hangs without the need for
instrumenting kernel code or using
capability is not available in
sw_emu flow or with
external test bench. There are two use models.
The first use model applies to standalone x86 simulation without external test
bench and with
--stop-on-deadlock enabled. At the time
that the x86 simulator detects deadlock, it prints a message indicating that the design
is deadlocked and the simulation will be terminated and suggests to rerun the simulation
with the trace option enabled. In this second simulation, the simulator produces a
textual report on the events that occurred during the simulation. Studying this report
can help you identify the root cause of the deadlock. The root cause can be as simple as
insufficient input data in a data file of the simulation platform, or it can be more
A second use model applies to simulations where
--timeout=secs options are
enabled. After the timeout expires, the simulator terminates and produces the trace
report. As in the first use model, analysis of the trace report can help identify the
root cause of the deadlock.
The following options are available:
--traceto get a full trace report at the end of the simulation.
--trace-printto get output displayed on the console while the simulation is running.
Trace Report Content
The trace report shows the sequence of events that occurred during the
simulation of your design in the x86 simulator. The name of the generated file is
x86simulator_output/trace/x86sim_event_trace.data.txt. The kind of
events that are recorded include:
- The start of a kernel iteration
- The end of a kernel iteration
- The start of a stream stall, i.e., the start of a read from a stream port of a kernel that blocks because of lack of data
- The end of a stream stall, i.e., the point where a read from a stream port that initially blocked, finally returns
- The start of a lock stall, i.e., the start of an attempt to acquire a window port where the lock is initially not available
- The end of a lock stall, i.e., the point in time where an attempt to acquire a window port that initially blocked, finally returns
The output of
--trace-print is not as
polished as the file generated by
--trace. If you
want to quickly see what is going on in the simulation, or if you are planning to
terminate the simulation via
CTRL-C instead of
--trace-print. This option is also a good choice if your simulation
does not terminate (deadlock or segmentation fault) and you do not want to specify
The columns of the output of
contain the following information.
- Timestamp: It is the same as in
- Internal name of the kernel (
x86sim_event_trace.data.txtuses the user name).
- Event type.
- Numeric value whose meaning depends on the event type: It encodes the port that you are waiting on for a lock or stream stall. It encodes the iteration number of a start of an iteration event.