Initialization consists of the following four internal stages:
This function powers up PL for 1.0 and 2.0 silicon and removes PS-PL isolation. It initializes clocks and peripherals as specified in psu-init. This function is not called in APU only reset.
Processor initialization will start in this stage. It will set up the Instruction and
Data caches, L2 caches, MMU settings, stack pointers in case of A53 and I/D caches,
MPU settings, memory regions, stack pointers, and TCM settings for R5-0. Most of
these settings will be performed in BSP code initialization. IVT vector is changed
to the start of OCM for A53 and to start of TCM (
0x0 in lowvec and
0xffff0000 in highvec) in case of R5-0.
DDR would be initialized in this stage. This function is not called in Master only reset.
This function performs required board specific initializations. Most importantly, it configures GT lanes and IIC.