In earlier releases, u-boot-zynq-scr.bbappend and
bootcmd files were available in meta-user layers. In the 2021.1 release, they are
removed from the meta-user layer and moved to Yocto eSDKs at
<plnx-proj-root>/components/yocto/layers/meta-xilinx/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-zynq-scr.
You can find these files on running the
petalinux-config/petalinux-build
command.
Added buildtools-extended
as an option in
petalinux-config
. Enable this option to use gcc and other
binaries as part of the PetaLinux tool. If you are using the newer Yocto version,
Gatesgarth, to build the project, the gcc version should be higher than version 6
which is not available by default in most of the supported operating systems. Enable
this option to unblock this issue.
The auto login option in rootfs config is enabled by default. You do not need to enter your user name as root and password as root after booting Linux.
Linux Components Selection
Added Image selector menuconfig option. It is disabled by default.