The Versal ACAP PMC uses a proprietary boot and configuration file format called the programmable device image (PDI) to program and configure the Versal ACAP. The PDI consists of headers, the PLM image, and design data image partitions to be loaded into the Versal ACAP. The PDI also contains configuration data, ELF files, NoC register settings, etc. The PDI image is programmed through the PMC block by the BootROM and PLM. For more information on the PDI file format and generation, see the Bootgen User Guide (UG1283).
Generation of the PDI varies based on your design flow:
- Traditional design flow for hardware-only systems
- Run the
write_device_imagecommand. For more information, see this link in the Vivado Design Suite User Guide: Programming and Debugging (UG908).
- Traditional design flow for embedded systems
- Run the Bootgen tool. For more information, see Bootgen Tool in the Vitis Unified Software Platform Documentation: Embedded Software Development (UG1400)
- Platform-based design flows
- Run the
v++ --packagecommand. For more information, see Packaging the System in the AI Engine User Guide (UG1076).