Creating a New Target Connection - 2021.2 English

Vitis Unified Software Platform Documentation: Embedded Software Development (UG1400)

Document ID
UG1400
Release Date
2021-12-15
Version
2021.2 English
You can configure the remote target details by adding a new connection in the Target Connections view.

To create new target connection:

  1. Click the Add Target Connection button () on the toolbar.
  2. The Target Connection Details page opens.
  3. In the Target Name field, type a name for the new remote connection.
  4. Check the Set as default target checkbox to set this target as default. The Vitis software platform uses the default target for all the future interactions with the board.
  5. In the Host field, type the name or IP address of the remote host machine. This is the machine that is connected to the target and the hw_server is running.
  6. In the Port field, type the port number on which the hw_server is running. By default, the hw_server runs on port 3121.
  7. Select Use Symbol Server, if the hardware server is running on a remote host.
  8. Click OK to create a new target connection.