Create JTAG sequence object.
Create JTAG sequence object. The jtag sequence command creates a new sequence object. After creation the sequence is empty. The following sequence object commands are available:
sequence state new-state [count]
Move JTAG state machine to
<new-state> and then generate
<count> JTAG clocks. If
<clock> is given and
<new-state> is not a looping state (RESET, IDLE, IRSHIFT,
IRPAUSE, DRSHIFT or DRPAUSE) then state machine will move towards RESET state.
sequence irshift [options] [bits [data]]
<data>arguments are not used for irshift when the -register option is specified. Available options:
<name>Select instruction register by name. This option is only supported for irshift.
<value>TDI value to use for all clocks in SHIFT state.
- -binary Format of
<data>is binary, for example data from a file or from binary format.
- -integer Format of
<data>is an integer. The least significant bit of data is shifted first.
- -bits Format of
<data>is a binary text string. The first bit in the string is shifted first.
- -hex Format of
<data>is a hexadecimal text string. The least significant bit of the first byte in the string is shifted first.
- -capture Capture TDO data during shift and return from sequence run command.
sequence delay usec
Generate delay between sequence commands. No JTAG clocks will be
generated during the delay. The delay is guaranteed to be at least
<usec> microseconds, but can be longer for cables
that do not support delays without generating JTAG clocks.
sequence get_pin pin
Get value of
pins is cable specific.
sequence set_pin pin value
Set value of
<value>. Supported pins is cable specific.
sequence atomic enable
Set or clear atomic sequences. This is useful to creating sequences that are guaranteed to run with precise timing or fail. Atomic sequences should be as short as possible to minimize the risk of failure.
sequence run [options]
- -binary Format return value(s) as binary. The first bit shifted out is the least significant bit in the first byte returned.
- -integer Format return values(s) as integer. The first bit shifted out is the least significant bit of the integer.
- -bits Format return value(s) as binary text string. The first bit shifted out is the first character in the string.
- -hex Format return value(s) as hexadecimal text string. The first bit shifted out is the least significant bit of the first byte of the in the string.
- -single Combine all return values as a single piece of data. Without this option the return value is a list with one entry for every shift with -capture and every get_pin.
Remove all commands from sequence.
JTAG sequence object.
set seqname [jtag sequence] $seqname state RESET $seqname drshift -capture -tdi 0 256 set result [$seqname run] $seqname delete