jtag targets - 2021.2 English

Vitis Unified Software Platform Documentation: Embedded Software Development (UG1400)

Document ID
UG1400
Release Date
2021-12-15
Version
2021.2 English

List JTAG targets or switch between JTAG targets.

Syntax

jtag targets 

List available JTAG targets.

jtag targets <target id>

Select <target id> as active JTAG target.

Options

Option Description
-set Set current target to entry single entry in list. This is useful in comibination with -filter option. An error will be generate if list is empty or contains more than one entry.
-regexp Use regexp for filter matching.
-nocase Use case insensitive filter matching.
-filter <filter-expression> Specify filter expression to control which targets are included in list based on its properties. Filter expressions are similar to Tcl expr syntax. Target properties are references by name, while Tcl variables are accessed using the $ syntax, string must be quoted. Operators ==, !=, <=, >=, <, >, && and || are supported as well as (). There operators behave like Tcl expr operators. String matching operator =~ and !~ match lhs string with rhs pattern using either regexp or string match.
-target-properties Returns a Tcl list of dictionaries containing target properties.
-open Open all targets in list. List can be shorted by specifying target-ids and using filters.
-close Close all targets in list. List can be shorted by specifying target-ids and using filters.
-timeout <sec> Poll until the targets specified by filter option are found on the scan chain, or until timeout. This option is valid only with filter option. The timeout value is in seconds. Default timeout is 3 seconds.

Returns

The return value depends on the options used.

<none>: JTAG targets list when no options are used.

-filter: Filtered jtag targets list.

-target-properties: Tcl list consisting of jtag target properties.

An error is returned when jtag target selection fails.

Example(s)

jtag targets

List all targets.

jtag targets -filter {name == "arm_dap"}

List targets with name "arm_dap".

jtag targets 2

Set target with id 2 as the current target.

jtag targets -set -filter {name =~ "arm*"}

Set current target to target with name starting with "arm".

jtag targets -set -filter {level == 0}

List JTAG cables.