delete_timing_results - 2021.2 English

Vivado Design Suite Tcl Command Reference Guide (UG835)

Document ID
UG835
Release Date
2021-10-22
Version
2021.2 English

Clear a set of timing results from memory

Syntax

delete_timing_results [‑type <arg>] [‑quiet] [‑verbose] <name>

Usage

Name Description
[-type] Type of timing results to clear; Values: bus_skew, check_timing, clock_interaction, clock_domain_crossings, config_timing, datasheet, pulse_width, slack_histogram, timing_path, timing_summary
[-quiet] Ignore command errors
[-verbose] Suspend message limits during command execution
<name> Name for the set of results to clear

Categories

Report, Timing

Description

Clear the specified timing results from the named result set. Both the type of the timing report, and the name of the timing report must be specified, or the command will fail.

Arguments

-type <arg> - (Optional) Specifies the type of timing results to be cleared. The available types are:
  • bus_skew - Delete the named report_bus_skew report .
  • check_timing - Delete the named check_timing report.
  • clock_interaction - Delete the named report_clock_interaction report.
  • clock_domain_crossing - Delete the named CDC report.
  • config_timing - Delete the current Timing COnfig report.
  • datasheet - Delete the named report_datasheet report.
  • pulse_width - Delete the named report_pulse_width report.
  • slack_histogram - Delete the named create_slack_histogram report.
  • timing_path - Delete the named report_timing report.
  • timing_summary - Delete the named report_timing_summary report.
Note: The default -type is timing_path, to delete reports generated by the report_timing command.
-quiet - (Optional) Execute the command quietly, returning no messages from the command. The command also returns TCL_OK regardless of any errors encountered during execution.
Note: Any errors encountered on the command-line, while launching the command, will be returned. Only errors occurring inside the command will be trapped.
-verbose - (Optional) Temporarily override any message limits and return all messages from this command.
Note: Message limits can be defined with the set_msg_config command.

<name> - (Required) Specifies the name of the timing results to be cleared.

Examples

The following example clears the specified results set from memory:
delete_timing_results -type clock_interaction clkNets