Changing compile_simlib Defaults - 2021.2 English

Vivado Design Suite User Guide: Logic Simulation (UG900)

Document ID
UG900
Release Date
2021-10-22
Version
2021.2 English

The config_compile_simlib Tcl command lets you configure third-party simulator options for use by the compile_simlib command.

Tcl Command

config_compile_simlib [-cfgopt <arg>] [-simulator <arg>] [-reset] [-quiet] [-verbose]

Where:

  • -cfgopt <arg>: Configuration option in form of <simulator>:<language>:<library>:<options>.
  • -simulator: The name of the simulator whose configuration you want
  • -reset: Lets you reset all previous configurations for the specified simulator
  • -quiet: Executes the command without any display to the Tcl Console.
  • -verbose: Executes the command with all command output to the Tcl Console.

For example, to change the option used to compile the UNISIM VHDL library, type:

config_compile_simlib {cxl.modelsim.vhdl.unisim:-source -93 -novopt}
Important: The compile_simlib command compiles Xilinx primitives and Simulation models of Xilinx Vivado IP. Xilinx Vivado IP cores are delivered as an output product when the IP is generated; consequently they are included in the pre-compiled libraries created using compile_simlib.

Compiling Patched IP Repository in a New Output Directory Using MYVIVADO

Assume that the patched IP repository is at the following location:

'/test/patched_ip_repo/data/ip/xilinx'

To compile the default installed IP repository and the repository that is pointed to by MYVIVADO in a new output directory, set the MYVIVADO environment (env) variable to point to this patched IP repository and run compile_simlib. compile_simlib will process the IP library sources from the default installed repository and the one set by MYVIVADO.

% setenv MYVIVADO /test/patched_ip_repo
% compile_simlib -simulator <simulator> -directory <new_clibs_dir>

Compiling Patched IP Repository in an Existing Output Directory Using MYVIVADO

Assume that the patched IP repository is at the following location:

'/test/patched_ip_repo/data/ip/xilinx'

To compile the repository pointed to by MYVIVADO in an existing output directory where the library was already compiled for the default installed IP repository, set the MYVIVADO env variable to point to this patched IP repository and run compile_simlib. compile_simlib will process the IP library sources from the repository set by MYVIVADO in the existing output directory.

% setenv MYVIVADO /test/patched_ip_repo
% compile_simlib -simulator <simulator> -directory <existing_clibs_dir>