Using the Saved Simulator User Interface Settings - 2021.2 English

Vivado Design Suite User Guide: Logic Simulation (UG900)

Document ID
UG900
Release Date
2021-10-22
Version
2021.2 English

By default, the Vivado simulator saves your configuration changes to a file under the simulation's working directory as you work with the user interface controls and Tcl commands of the Vivado simulator. The settings that are saved include the following:

  • The state of the filter buttons and column widths of the Scopes and Objects windows.
  • Tcl properties of the simulation, including array display limit, default radix, default time unit for the run command, and trace limit.
  • Radixes and the Show as Enumeration state that you set on HDL objects in the Objects window.

After you shut down the simulation, the Vivado simulator restores your settings when you reopen and run the Vivado simulator.

Important: Turn off the Clean Up Simulation Files check box in Vivado's Simulation Settings to ensure that the settings file does not get erased when you relaunch the simulation.
Tip: To revert the settings to their defaults, delete the settings file. You can find the settings file under the Vivado project directory at <project>.sim/<simset>/<simtype>/xsim.dir/<snapshot>/xsimSettings.ini. For example, the settings file for the default behavioral simulation run of the BFT example design would reside at bft.sim/sim_1/behav/xsim.dir/bft_tb_behav/xsimSettings.ini. Alternatively, turn on the Clean Up Simulation Files check box in the Simulation Settings.