When selecting the
-slr option, the generated report shows the SLR related
utilization. Starting with
Vivado® Design Suite 2018.3, the SLR
utilization tables have been enhanced in the GUI and text report, which includes the
following 4 different tables:
- SLR Connectivity
- SLR Connectivity Matrix
- SLR CLB Logic and Dedicated Block Utilization
- SLR IO Utilization
These tables are also shown by default when running
report_utilization. The SLR connectivity table shows the LAGUNA registers utilized for both TX and RX directions on each SLR side.
Figure 1. SLR Connectivity Report in GUI
The total utilized LAGUNA registers are also reported in the ADVANCED table for both directions.
Figure 2. LAGUNA Register Report in GUI
The SLR CLB Logic and Dedicated Block Utilization table shows the resource utilization for each SLR.
Figure 3. Utilization in Each SLR