Step 3: Using the Analog Wave Viewer - 2021.2 English

Vivado Design Suite Tutorial: Logic Simulation

Document ID
UG937
Release Date
2021-11-10
Version
2021.2 English
The sine[19:0] signals you are monitoring are analog signals, which you can view better in Analog wave mode. You can choose to display a given signal as Digital or Analog in the Waveform window.
  1. In the Waveform window, select the sine[19:0] signal.
  2. Right-click to open the popup menu, and select Waveform Style > Analog, as shown in the figure below.

  3. Right-click to open the popup menu again, and select Radix > Signed Decimal as shown in the figure below.