Using the Timing Report to Determine the Impact of Power Optimization - 2021.2 English

UltraFast Design Methodology Guide for Xilinx FPGAs and SoCs

Document ID
UG949
Release Date
2021-11-19
Version
2021.2 English

Power optimization works to minimize the impact on timing while maximizing power savings. However, in certain cases, if timing degrades after power optimization, you can employ a few techniques to offset this impact.

Where possible, identify and apply power optimizations only on non-timing critical clock domains or modules using the set_power_opt XDC command. If the most critical clock domain happens to cover a large portion of the design or consumes the most power, review critical paths to see if any cells in the critical path have the IS_CLOCK_GATED property with value TRUE, indicating that the paths are the result of a power optimization. To improve timing at the expense of increased power in a subsequent implementation, use the set_power_opt XDC constraint to disable power optimization on the power-optimized cells in the critical path. Then rerun implementation with the set_power_opt XDC constraints or Tcl commands.

The following Tcl example disables power optimization on cells in the top 100 failing paths:

set pwr_critical_cells [get_cells -of [get_timing_paths -slack_lesser_than 0 -max_paths 100] -filter {IS_CLOCK_GATED}]
set_power_opt -exclude_cells $pwr_critical_cells