IBUF_INTERMDISABLE - 2021.2 English

Vivado Design Suite 7 Series FPGA and Zynq-7000 SoC Libraries Guide (UG953)

Document ID
UG953
Release Date
2021-10-22
Version
2021.2 English

Primitive: Single-ended Input Buffer with Input Termination Disable and Input Disable

Introduction

This design element is an input buffer used to connect internal logic to an external pin. This element includes an input termination (INTERM) enable/disable as well as an input path disable as additional power saving features when the I/O is not being used for a sustained amount of time.

Port Descriptions

Port Direction Width Function
I Input 1 Input port connection. Connect directly to top-level port in the design.
IBUFDISABLE Input 1 Disables input path through the buffer and forces to a logic high when USE_IBUFDISABLE is set to "TRUE" and this signal is asserted high. If USE_IBUFDISABLE is set to "FALSE" this input is ignored and should be tied to ground. This feature is generally used to reduce power at times when the I/O is idle for a period of time.
INTERMDISABLE Input 1 Disables input termination. This feature is generally used to reduce power at times when the I/O is idle.
O Output 1 Buffer output representing the input path to the device.

Design Entry Method

Instantiation Yes
Inference No
IP Catalog Yes
Macro support No

Available Attributes

Attribute Type Allowed Values Default Description
IBUF_LOW_PWR STRING "TRUE", "FALSE" "TRUE" Allows a trade off of lower power consumption vs. highest performance when referenced I/O standards are used.
IOSTANDARD STRING See Data Sheet "DEFAULT" Assigns an I/O standard to the element.
USE_IBUFDISABLE STRING "TRUE", "FALSE" "TRUE" Enables or disables the feature of IBUFDISABLE.

VHDL Instantiation Template

Unless they already exist, copy the following two statements and paste them before the entity declaration.
Library UNISIM;
use UNISIM.vcomponents.all;

-- IBUF_INTERMDISABLE: Single-ended Input Buffer with Termination Input Disable
--                     May only be placed in High Range (HR) Banks
--                     7 Series
-- Xilinx HDL Language Template, version 2021.2

IBUF_INTERMDISABLE_inst : IBUF_INTERMDISABLE
generic map (
   IBUF_LOW_PWR => "TRUE", -- Low power (TRUE) vs. performance (FALSE) setting for referenced I/O standards
   IOSTANDARD => "DEFAULT", -- Specify the input I/O standard
   USE_IBUFDISABLE => "TRUE") -- Set to "TRUE" to enable IBUFDISABLE feature
port map (
   O => O,     -- Buffer output
   I => I,     -- Buffer input (connect directly to top-level port)
   INTERMDISABLE => INTERMDISABLE, -- Input Termination Disable
   IBUFDISABLE => IBUFDISABLE -- Buffer disable input, low=disable
);

-- End of IBUF_INTERMDISABLE_inst instantiation

Verilog Instantiation Template


// IBUF_INTERMDISABLE: Single-ended Input Buffer with Termination Input Disable
//                     May only be placed in High Range (HR) Banks
//                     7 Series
// Xilinx HDL Language Template, version 2021.2

IBUF_INTERMDISABLE #(
   .IBUF_LOW_PWR("TRUE"),   // Low power ("TRUE") vs. performance ("FALSE") for referenced I/O standards
   .IOSTANDARD("DEFAULT"),  // Specify the input I/O standard
   .USE_IBUFDISABLE("TRUE") // Set to "TRUE" to enable IBUFDISABLE feature
) IBUF_INTERMDISABLE_inst (
   .O(O),                    // Buffer output
   .I(I),                    // Buffer input (connect directly to top-level port)
   .IBUFDISABLE(IBUFDISABLE),    // Buffer disable input, high=disable
   .INTERMDISABLE(INTERMDISABLE) // Input Termination Disable
);

// End of IBUF_INTERMDISABLE_inst instantiation

Related Information

  • See the 7 Series FPGA SelectIO Resources User Guide (UG471).