LDPE - 2021.2 English

Vivado Design Suite 7 Series FPGA and Zynq-7000 SoC Libraries Guide (UG953)

Document ID
UG953
Release Date
2021-10-22
Version
2021.2 English

Primitive: Transparent Data Latch with Asynchronous Preset and Gate Enable

Introduction

This design element is a transparent data latch with asynchronous preset and gate enable. When the asynchronous preset (PRE) is High, it overrides the other input and presets the data (Q) output High. Q reflects the data (D) input while the gate (G) input and gate enable (GE) are High. The data on the (D) input during the High-to-Low gate transition is stored in the latch. The data on the (Q) output remains unchanged as long as (G) or (GE) remains Low.

This latch is asynchronously preset, output High, when power is applied. Power-on conditions are simulated when global set/reset (GSR) is active.

Logic Table

Inputs Outputs
PRE GE G D Q
1 X X X 1
0 0 X X No Change
0 1 1 D D
0 1 0 X No Change
0 1 D D

Design Entry Method

Instantiation Yes
Inference Recommended
IP Catalog No
Macro support No

Available Attributes

Attribute Type Allowed Values Default Description
INIT BINARY 0, 1 1 Specifies the initial value upon power-up or the assertion of GSR for the (Q) port.

VHDL Instantiation Template

Unless they already exist, copy the following two statements and paste them before the entity declaration.
Library UNISIM;
use UNISIM.vcomponents.all;

-- LDPE:  Transparent latch with Asynchronous Set and
--        Gate Enable.
--        7 Series
-- Xilinx HDL Language Template, version 2021.2

LDPE_inst : LDPE
generic map (
   INIT => '0') -- Initial value of latch ('0' or '1')
port map (
   Q => Q,      -- Data output
   CLR => CLR,  -- Asynchronous preset/set input
   D => D,      -- Data input
   G => G,      -- Gate input
   GE => GE     -- Gate enable input
);

-- End of LDPE_inst instantiation

Verilog Instantiation Template


// LDPE:  Transparent latch with Asynchronous Preset and Gate Enable.
//        7 Series
// Xilinx HDL Language Template, version 2021.2

LDPE #(
   .INIT(1'b1) // Initial value of latch (1'b0 or 1'b1)
) LDPE_inst (
   .Q(Q),      // Data output
   .PRE(PRE),  // Asynchronous preset/set input
   .D(D),      // Data input
   .G(G),      // Gate input
   .GE(GE)     // Gate enable input
);

// End of LDPE_inst instantiation

Related Information

  • See the 7 Series FPGAs Configurable Logic Block User Guide (UG474).