IOBUFDS - 2021.2 English

UltraScale Architecture Libraries Guide (UG974)

Document ID
UG974
Release Date
2021-10-22
Version
2021.2 English

Primitive: Differential Input/Output Buffer

  • PRIMITIVE_GROUP: I/O
  • PRIMITIVE_SUBGROUP: BIDIR_BUFFER
  • Families: UltraScale, UltraScale+

Introduction

The IOBUFDS is a differential input/output buffer primitive. A logic-High on the T pin disables the output buffer. When the output buffer is 3-stated (T = High), the input buffer and any on-die receiver termination (uncalibrated or DCI) are ON. When the output buffer is not 3-stated (T = Low), any on-die receiver termination (uncalibrated or DCI) is disabled.

I/O attributes that do not impact the logic function of the component, such as IOSTANDARD, DRIVE, and SLEW, should be supplied to the top-level port via an appropriate property.

Logic Table

Inputs Bidirectional Outputs
I T IO IOB O
X 1 Z Z No Change
0 0 0 1 0
I 0 1 0 1

Port Descriptions

Port Direction Width Function
I Input 1 Input of OBUF. Connect to the logic driving the output port.
IO Inout 1 Bidirectional diff_p port to be connected directly to top-level inout port.
IOB Inout 1 Bidirectional diff_n port to be connected directly to top-level inout port.
O Output 1 Output path of the buffer.
T Input 1 3-state enable input signifying whether the buffer acts as an input or output.

Design Entry Method

Instantiation Yes
Inference No
IP and IP Integrator Catalog No

Available Attributes

VHDL Instantiation Template

Unless they already exist, copy the following two statements and paste them before the entity declaration.
Library UNISIM;
use UNISIM.vcomponents.all;

-- IOBUFDS: Differential Input/Output Buffer
--          UltraScale
-- Xilinx HDL Language Template, version 2021.2

IOBUFDS_inst : IOBUFDS
port map (
   O => O,     -- 1-bit output: Buffer output
   I => I,     -- 1-bit input: Buffer input
   IO => IO,   -- 1-bit inout: Diff_p inout (connect directly to top-level port)
   IOB => IOB, -- 1-bit inout: Diff_n inout (connect directly to top-level port)
   T => T      -- 1-bit input: 3-state enable input
);

-- End of IOBUFDS_inst instantiation

Verilog Instantiation Template


// IOBUFDS: Differential Input/Output Buffer
//          UltraScale
// Xilinx HDL Language Template, version 2021.2

IOBUFDS IOBUFDS_inst (
   .O(O),     // 1-bit output: Buffer output
   .I(I),     // 1-bit input: Buffer input
   .IO(IO),   // 1-bit inout: Diff_p inout (connect directly to top-level port)
   .IOB(IOB), // 1-bit inout: Diff_n inout (connect directly to top-level port)
   .T(T)      // 1-bit input: 3-state enable input
);

// End of IOBUFDS_inst instantiation

Related Information

  • See the UltraScale Architecture SelectIO Resources User Guide (UG571).