The following is an example of a parameter mismatch on the
FREQ_HZ property of a clock pin. In this example, the frequency does not match between the
S01_AXI port and the
S_AXI interface of the AXI Interconnect. This error is revealed when the design is validated.
Figure 1. FREQ_HZ Property Mismatch Between Port and Interface Pin
S01_AXIport has a frequency of 200 MHz as can be seen in the properties window.
S01_AXIinterface of the AXI Interconnect is set to a frequency of 100 MHz.
You can fix this error by changing the frequency in the property, or by double-clicking the
S01_AXI port and correcting the frequency in the Frequency field of the customization dialog box.
Figure 2. Change Frequency Port in Properties Window
After you change the frequency, re-validate the design to ensure there are no errors.