Software Prerequisites - 2022.1 English

H.264/H.265 Video Codec Unit Solutions LogiCORE IP Product Guide (PG252)

Document ID
PG252
Release Date
2022-04-29
Version
2022.1 English

All of the software prerequisites for using the VCU are included in Xilinx PetaLinux included in Vitis™ software development platform release. Refer to the Release Notes Links at the bottom of the Embedded Design Hub - PetaLinux Tools or to the Release Notes link on the download page.

For the Xilinx Linux kernel, refer to xilinx_zynqmp_defconfig at linux-xlnx/arch/arm64/configs/xilinx_zynqmp_defconfig, where all the Xilinx driver configurations options are enabled.

For the vanilla Linux kernel, refer to xilinx_zynqmp_defconfig to enable and disable a Xilinx driver in the Linux kernel. If the design enables or disables the Xilinx IP, the corresponding device-tree node should be set to enable the driver to probe at run time kernel.

The application software using the VCU is written on top of the following libraries and modules, shown in the following table.