The Vitis IDE debug environment has many features found in traditional GUI-based debug environments, such as GDB. You can add break points to the code, step over or step into specific lines of codes, loops, or functions, and examine the state of variables and force them to specific values. These are just a few of the features in the Vitis IDE debug environment.
After you have launched the Debug perspective, you will see several windows or views displayed, such as the Debug view in the upper left of the display, as shown in the following figure. During the debug process, several windows show the debug state that include code at breakpoint, step over states, breakpoints view, variables view, registers view, disassemble view, and pipeline view (single kernel only).
The Debug view shows states of cores that are under debug. It shows where (which file and which line of source code of the file) debugger stops at and with what action it is taking (breakpoint/step over/…) as shown in the following figure.
The following figure shows the Breakpoints information with current setup breakpoints. The square with a check mark indicates the breakpoint is enabled. Click on the check mark to clear the check mark and disable breakpoint during debugging. This lets you manage breakpoints without having to remove them or add them back into the code.
main() by default.
Breakpoints attached to a
while statement consume
two breakpoint resources. A workaround is to attach the breakpoint inside the
while loop. This only consumes one